Whaleflo 220V AC 17Liter Self Priming 40PSI Coffee Cart Water Pump
220 volt coffee cart pump
Whaleflo 12V caravan pump FL series is ideal water transfer in
Coffee carts, food vans, farm shed, small home or cabin.FL series pump has four diaphragm pump.Whaleflo 220v coffee cart water pump pressure vary from17-60PSI, Flow from 10-17LPM.
Whaleflo FL-43 220 volt diaphragm water pump is perfect for installing in a caravan coffee cart or food van with a flow of 17 L/min. This 220 volt diaphragm water pump can supply 40 PSI water pressure to multiple outlets where you don't have much space turning on and off automatically as you turn the tap on and off.
Whaleflo FL-43 is the standard pump used wide in Coffee carts and Food Trucks as used by many cart manufacturers.we have found this to be the most reliable 240 volt water pump available for this application when the set up is done correctly with an accumulator tank in the system.
Whaleflo recommend you use an accumulator tank for whisper-quiet operation, and to smooth the supply of water pressure and thus protecting your coffee machines, your pump and to prevent pressure switch failure. The ideal and recommended accumulator tank will provide potable water and if we know when you are purchasing which pump it is to go with ( just drop us a message ) we will pressurize the tank to the correct PSI to match your 240 volt diaphragm water pump
Whaleflo 220v Food Van pump chamber material made of Santoprene.The inside check value is EPDM(Ethylene Propylene Diene Monomer) and Viton use widely for liquid PH value vary from 4-11PH value.
DP pump with 1/2’’(12mm) hose barb,3/4’’ male thread and 3/4’’ female thread.
Pump working duty: working intermittent
Performance
High flow, self-priming, Dry run with damage , Low noise, automatic pressure switch,mini and flexible, superior rubber feet with low noise.
Application
caravan,RV,marine, garden,camping,boat, outdoor
Technical Data
|
Model |
Volt（V)） |
Open Flow（LPM/GPM） |
Demand Pressure( PSI/Bar) |
Amps Draw( A) |
Check value |
Diaphragm |
Ports |
Wire connection |
|
FL30 |
12 |
10(2.6) |
17(1.17) |
2.2 |
EPDM/VITON |
Santoprene |
3/4‘’ |
2-pin/ Leads |
|
FL31 |
24 |
10(2.6) |
17(1.17) |
1.5 |
EPDM/VITON |
Santoprene |
3/4‘’ |
2-pin/ Leads |
|
FL35 |
12 |
12.5(3.3) |
35(2.41) |
7 |
EPDM/VITON |
Santoprene |
3/4‘’ |
2-pin/ Leads |
|
FL34 |
24 |
12.5(3.3) |
35(2.41) |
4 |
EPDM/VITON |
Santoprene |
3/4‘’ |
2-pin/ Leads |
|
FL60 |
12 |
17(4.5) |
60(4.13) |
13.2 |
EPDM/VITON |
Santoprene |
3/4'' |
2-pin/Leads |
|
FL44 |
24 |
17(4.5) |
40(2.76) |
5.6 |
EPDM/VITON |
Santoprene |
3/4'' |
2-pin/Leads |
|
FL40 |
12 |
17(4.5) |
40(2.76) |
9.2 |
EPDM/VITON |
Santoprene |
3/4'' |
2-pin/Leads |
|
FL33 |
115 |
12.5(3.3) |
35(2.41) |
0.8 |
EPDM/VITON |
Santoprene |
3/4” |
2-pin/lLeads |
|
FL32 |
220 |
12.5(3.3) |
35(2.41) |
0.4 |
EPDM/VITON |
Santoprene |
3/4'' |
2-pin/Leads |
|
FL41 |
115 |
17(4.5) |
40(2.76) |
1.5 |
EPDM/VITON |
Santoprene |
3/4" |
2-pin/Leads |
|
FL43 |
220 |
17(4.5) |
40(2.76) |
0.8 |
EPDM/VITON |
Santoprene |
3/4" |
2-pin/Leads |
|
Pump Design |
4 chamber Daiphragm |
|
Port size |
3/4''(19mm) female thread |
|
Connector |
1/2'' hose barb , 3/4'' BSPT thread |
|
Voltage |
12V, 24V ,115V,230V |
|
Check value |
EPDM or VITON |
|
Liquid temp |
140F(60C) maximum |
|
Seld-priming |
6.5 feet （ 2M）suction Lift |
