Whaleflo 110V 220V Self Priming AC Diesel Fuel Transfer Pump 80Lpm
AC Diesel Fuel Transfer Pump Descritption
Product name
|
Car Electric oil transfer Pump * single suction
|
||
Voltage
|
AC 220V ±10%50Hz
AC 110V±10% 60Hz
|
||
OEM
|
Acceptable
|
||
By pass valve
|
Yes
|
||
Power
|
750W
|
||
Max Suction
|
5m
|
||
Type
|
vane pump self priming
|
||
Weight
|
8.5Kg
|
||
Flow
|
70-80L/min
|
||
Strainer
|
Yes
|
This high efficient self-priming oil extractor pump is an ideal equipment for quick and clean oil-changes,
1. Oil extractor pump with 750W for effective and powerful operation.
2. Ideal equipment for quick and clean oil-changes.
3. Easy to install.no specialized tools needed.
5.Impeller suction single suction.More powerful.
6. Ideal for industrial,boat, vans, cars, quads and other Vehicles, fit to use with diesel, kerosene, suitable
for extracting oil, diesel
1. For fueling diesel oil, kerosene, not for gasoline. Heavy fuel oil transfer pump
2. Cast iron casing, rotary vane pump, steel rotor.
3. Bypass valve built in.
4. Built in filter, easily accessible for cleaning.
5. Self priming: Yes
6. Induction motor with aluminum casing, IP54
7. Continuous working principle
8. Applicable in transferring oil from barrels, fueling machines in construction sites, boat, agriculture.
Inlet&out Size: 1"
Flow Rate: 80L/min
Power: 750W
Suction:3-5M
Head: 5-10m
Grade of protection : IP54
Product introduction:
This self-priming pump only for pumping Diesel or Kerosene,do not pump low ignition oil like Gasoline, Liquefied Petroleum Gas or Alcohol as well as high viscous oil like Engine Oil.
Technical Parameters:
Model |
JYB40 |
YB60 |
YB80 |
Flow Rate |
(20-40)L/min |
(20-60)L/min |
(50-80)L/min |
Rated Voltage |
AC220V |
AC 220V or 110V |
AC 220V or 110V |
Power |
120W |
375W |
550W |
Pressure |
0.16-0.18Mpa; 1.6-1.8bar; |
0.18-0.20Mpa; 1.8-2.0bar; |
|
Suction Lift |
3m |
3-5m |
|
Head Lift |
6m |
5-10m |
|
In-out |
In BSPT3/4", |
In BSPT1", Out BSPT1" |
Note:
1. The filter must be cleaned regularly.
2. The pumping fuel's ignition should not exceed 55 ºC.
3. Do not empty spin.