Feature
Super RV fresh water pump has comprised by 3 chamber allow pressure 2.9GPM.It can use in RV tank,shower,and outdoor faucet.
Automatic turn on pressure is 25PSI and off pressure is 50PSI.matching with 2 x 12mm barbed for hose
2 x1/2" male thread &filter.
Recommendation reason.
Pressure fresh water pump is one of your top choices if you wish to find the ideal water pump for your recreational vehicle. What I like about it is that it makes use of an automatic triplex diaphragm, allowing it to operate in a smooth manner without the need for an accumulator tank. It is because it already comes with a pulsation eliminator.
Offered at an affordable price, I am pretty sure that this self-priming water pump is built to satisfy many potential users because of its ability to suction lift for a max of 9 feet. Another noticeable benefit showcased by this product is it has a soft mount capable of absorbing noise.
With that in mind, there is a lower chance for it to cause annoying sounds and vibrations when the water pump operates.
Advantage
One more thing that I am sure anyone will like about this pump is the fact that it has a simple installation process because it already comes with snap-in, half-inch port fittings.
Furthermore, it can operate safely even if it is in its dry state. Hooking it up is easy, too. One more advantage is the fact that it is constructed out of corrosion-resistant materials. With that in mind, there is a great chance for it to last longer even with the least maintenance.
This is where basic electrical skills come in handy. Run a wire from the nearest DC power source in your RV and splice that wire into the positive side of your water pump’s power supply.
Add the rocker switch to the power supply so you can turn the pump on and off by yourself. This will prevent the need to have someone inside operating the pump
RV fresh water mod bypass modification diagram
Setup installed advice.
First go inside your RV to make sure the water pump is turned off.
Next, head outside and refill your water tank by dipping the clear PVC hose that’s attached to your pump, into the external water supply source.
Turn the tee valves in succession to direct water into the tank.
Be sure to keep the freshwater supply inlet cap open to avoid air pressure build-up inside the tank.
When your tank is full, turn off the rocker switch and always return the tee valves to their proper positions to resume normal functioning of your freshwater system.
